$200. It's a nylon/glass/glass/glass lay-up with the nylon on the outside so that there's no fiberglass rash problem. The only use that it has had are two trips on the Deerfield and one trip down the Grand Canyon.
The two halves were molded many years ago but never assembled. The two halves were taped together and stored in a garage. I bought the two halves then seamed it with two Kevlar inside seams and three glass outside seams. I also installed an ethafoam wall. All of the outfitting was done with West System epoxy resin.
Jim Michaud
860-872-4978
jimmichaud@comcast.net
Almost new high volume end-hole C-2
Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin
-
Jim Michaud
- CBoats Addict
- Posts: 318
- Joined: Tue Mar 11, 2003 3:24 am
- Location: Vernon, Connecticut