Slalom C1 Mold for sale

Sir Adam · Post by **Sir Adam** » Sun Aug 30, 2009 8:40 pm

Stealth by Hearn / Lugbill. Between Fanatic and F2 I believe, designed for 1992 Olympics. I picked up the mold from Eric Zitzow years ago meaning to use it to make a boat to cut down for a squirt boat, but end up going in a different direction (maven, and Mentor from scratch).

As I have a few molds these days I'm never likely to build one, and I'd love to see it get some use. I've never unbolted it from when I purchased it (2002 or so), but it has been stored on it's side in a dry barn all this time.

Asking $200, partial or full trades considered.

East Coast Canoes · Post by **East Coast Canoes** » Mon Sep 21, 2009 4:57 pm

Adam,
Do you still have the mold?
Recently I've caught the slalom bug after outffing several slalom boats and taking a slalom clinic in Aug.
I picked up a used older boat and am interested in making one.
A couple of questions.
What's was it designed for?(Slalom,squirt)
What kind of ideal max paddlers weight?
Let me know
John

Sir Adam · Post by **Sir Adam** » Mon Sep 21, 2009 5:25 pm

Slalom design, for the olympics / worlds / etc...

Info I have to date on the design:

Designed for the tight turns at the '92 Olympics

One of the lower volume slalom designs

When you build a boat you an add or subtract volume, depending on the cut you want. That said, I'd think over 210 lbs or so you'd be pushing it a bit in big water (I know a few folks 180lbs +- that still paddle their old race Stealths).

East Coast Canoes · Post by **East Coast Canoes** » Mon Sep 21, 2009 6:06 pm

Well I'm about 205 ish. I'm honestly looking to make one for myself and mess around with making one. If we can make some arrangemnets I will take it off of your hands.
Do have any pics of the mold or of any boats it can produce? Just curious.
Let me know.
John
sales@eastcoastcanoes.com