C-2

Any Boat, Gear, or outdoor related item you have for sale. If you use it on a paddling trip, or to prepare for one, it's fair game.

Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin

Post Reply
User avatar
sbroam
CBoats.net Staff
Posts: 3969
Joined: Thu Nov 07, 2002 2:12 am
Location: Lexington, SC
Contact:

C-2

Post by sbroam »

The boat is a Noah Moldau. Back in the day, I guess you would / could order a boat that was only finished to a point. This one has the deck and hull seamed together on the inside only - no outside seams. Cockpit holes are roughed in. No walls, no saddles, nothing inside. I had planned to finish it out, but never did - open boating with the kids has just been . I bought seam tape from Sweets. I bought to cockpit rims from Kaz, not trusting my glass skills to lay them up, but figuring I could epoxy them in. It's never been in the water - not a scratch on it. I think I have pictures somewhere - possibly on an old hard drive - that show the build sticker. I could of course, pull this down from the rafters :-).

I'll try to get some photos uploaded shortly.

The boat is in Lexington, SC (near Columbia).


Seam tape and cockpit trims included.

Make offer.
User avatar
sbroam
CBoats.net Staff
Posts: 3969
Joined: Thu Nov 07, 2002 2:12 am
Location: Lexington, SC
Contact:

Re: C-2

Post by sbroam »

An admittedly poor picture...
Attachments
20150222_140601.jpg
Post Reply