Mohawk thigh retainer

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin

Post Reply
Sir Adam
CBoats.net Staff
Posts: 4136
Joined: Mon Apr 08, 2002 12:00 am
Location: Adirondacks, NY State, USA
Contact:

Mohawk thigh retainer

Post by Sir Adam »

Mohawk thigh retainer
by Brian Jones
What is the best method to secure a mohawk thigh retainer to a W.S. Z hull. Also...is contact cement the best glue to use for securing foam, and should I use only a little glue on the saddle in case I don't like the position?
Posted on Jun 6, 2002, 5:18 PM

Answer.....
by Bryant
to your question check May 28 post
Posted on Jun 7, 2002, 3:14 AM

bolts
by rob w
I believe the only thing that's going to hold the thigh retainer to that kind of plastic is bolts through the hull. For foam I use weldwood contact cement, not the water based stuff but the flammable stuff. In my Z I used a dagger console with thigh straps bolted from the console to the thigh brace holes along side the cockpit. The Z is a fun boat. Let us know how the thigh retainer works out.
Rob W.
Posted on Jun 7, 2002, 6:29 AM
Keep the C!
Adam
Post Reply