mitchell premier C1 paddle curved carbon blade/wood shaft

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin

Post Reply
danab
C Boater
Posts: 46
Joined: Sun Apr 06, 2003 2:13 pm

mitchell premier C1 paddle curved carbon blade/wood shaft

Post by danab »

57.5 inches, wood dowel grip, curved carbon covered blade, and very slightly thinner, wood oval shaft. Paddle is in very good condition and well cared for, just some cosmetic scratches. Used 1 season, and recoated at Mitchell during winter.

>$225 new, will sell for $125

dana dbove@usgs.gov
in colorado
User avatar
Mike W.
CBoats.net Staff
Posts: 2206
Joined: Fri Jan 03, 2003 10:52 pm
Location: Roanoke Rapids, NC
Contact:

Re-coated?

Post by Mike W. »

Hey Dana,
My Mitchell has seen a whole bunch of abuse. Would you explain the "recoating" of your paddle? What exactly did they do? Why? What do they charge for it?
Thanks,
Mike W.
danab
C Boater
Posts: 46
Joined: Sun Apr 06, 2003 2:13 pm

paddle is sold

Post by danab »

about recoat: just the clear expoy was chipping, so had mitchell's recoat to protect blade, which was intact. The cost was nominal and it seems a tune up from time to time will keep blade going for a long while.

dana
User avatar
Mike W.
CBoats.net Staff
Posts: 2206
Joined: Fri Jan 03, 2003 10:52 pm
Location: Roanoke Rapids, NC
Contact:

Thanks

Post by Mike W. »

Thanks for the information. Seems like a real good idea.
Mike W.
Post Reply