Remix 69 C-1 outfitted and reviewed
Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin
- oopsiflipped
- CBoats Addict
- Posts: 954
- Joined: Sat Jun 03, 2006 3:32 am
One more thing. LL suggested weight range for the 69 is 130-240 I think. Most of the time when I choose a kayak hull for a conversion I go up a notch in size. You might be better off in the 79 whose upper recommended limit is 280 I think. Check the LL website for accurate paddler weight recommendations.
- TheKrikkitWars
- CBoats.net Staff
- Posts: 1440
- Joined: Thu Apr 10, 2008 11:27 am
- Location: Sheffield, South Yorkshire
- Contact:
The remix 69 paddles awful if you're even closing on the top of the weight range, I'm 87kg (191lbs) and found that it simply sat too low in the water. I'd very much reccomend going up a size!
Joshua Kelly - "More George Smiley than James Bond"
CBoats Moderator - Not necessarily representing the CBoats staff though...(I'll use words like "moderator", "We" and "CBoats" to make it clear when I am)
CBoats Moderator - Not necessarily representing the CBoats staff though...(I'll use words like "moderator", "We" and "CBoats" to make it clear when I am)
Seat Rail Conversions are easy: I did a bulkhead/single strap conversion with airplane seat belt buckles for quick release. Cam buckles from an old cascade outfitting were used to adjust the thigh straps for tightness. The bulkhead is not glued in but held tightly in place by 1" nylon webbing that runs from the deck of the boat to the seat rail. There is easy access to the bow for storage. I placed a foam shim between the bow foam pillar and the bulkhead, held in place with velcro. The thickness of the shim can be changed to accomodate larger paddlers or winter clothing. I placed the attachment points for the thigh straps on the hull rather far behind me to avoid the need for hip pads. I wanted to save all the exit room I could. Georgia Stu has put up three pics here: http://s616.photobucket.com/albums/tt24 ... onversion/
Buy a hull from Bernie: I got this hull from Bernie at a real good price and he brought it to me on one of his trips south to pick up more boats. It came empty except for foam walls and the seat rail and had no factory holes predrilled. It was very easy to convert.
Buy a hull from Bernie: I got this hull from Bernie at a real good price and he brought it to me on one of his trips south to pick up more boats. It came empty except for foam walls and the seat rail and had no factory holes predrilled. It was very easy to convert.
Good job cheajack! Im not sure If I want a double strap system or a bulkhead/strap one. I love the advantage to adjust the system with what you are wearing. Her in canada in summer we can be in light t-shirt and in spring there have a lot of snow on the shore...
How far are your knees in the bulkhead?
MaT
How far are your knees in the bulkhead?
MaT
Thanks to all
Here's how I have outfit my remix, I have bet on light outfit
Ducktape is my best friend
http://i638.photobucket.com/albums/uu10 ... 0_0758.jpg
http://i638.photobucket.com/albums/uu10 ... 0_0762.jpg
http://i638.photobucket.com/albums/uu10 ... 0_0763.jpg
MaT
Here's how I have outfit my remix, I have bet on light outfit
Ducktape is my best friend
http://i638.photobucket.com/albums/uu10 ... 0_0758.jpg
http://i638.photobucket.com/albums/uu10 ... 0_0762.jpg
http://i638.photobucket.com/albums/uu10 ... 0_0763.jpg
MaT