Wanted: Mad River Flashback repair help
Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin
-
- c
- Posts: 6
- Joined: Thu Apr 16, 2009 6:34 pm
Is this enough information, or do I need to have him measure the length of the individual thwarts?
Carol
"Carol,
I measured the thwarts from the stern down the center line. These measurements are from the tip of the stern to the center of the thwarts:
43 1/4", 66 1/4", and 114 1/2".
Good Luck,
Chuck""
Carol
"Carol,
I measured the thwarts from the stern down the center line. These measurements are from the tip of the stern to the center of the thwarts:
43 1/4", 66 1/4", and 114 1/2".
Good Luck,
Chuck""