2010 Jackson Fun

horizongfx · Post by **horizongfx** » Mon Feb 01, 2010 6:55 pm

Louie wrote:Point taken, but if they are paddled from the proper position with a real paddle and not a sissy stick, are they C1's after bein fixed

Speaking of Fixin Kayacks, I'm Fixin this one now. I Even Fixed the Graphics. I now call it the Sleazy CZ-1, I'm Gonna Weld some Hip Grabbers on this Puppy too !

Jamie@Openplayboater · Mon Feb 01, 2010 7:46 pm

I guess the answer is no then...

horizongfx · Post by **horizongfx** » Mon Feb 01, 2010 8:06 pm

what was the question ?

SkeeterGuy86 · Post by **SkeeterGuy86** » Mon Feb 01, 2010 8:26 pm

im not a person that paddles a C-1 (would like to someday but got to get a roll down first) and to me it seems that from the looks of the boat being stern heavy will be the main problem ... the 4 fun is a little bigger (3 inches longer, 2 inches higher at it highest point, and a little over an inch wider) would be an easier conversion ... but like i said i have 2 major problems with getting into a C-1 .... i cant roll a boat yet and my knees are bad enough that i have to have a saddle thats a minimum of 11 inches from the bottom of my knees to the bottom of my butt

Louie · Post by **Louie** » Mon Feb 01, 2010 9:00 pm

Lost Tribe skeeter guy 86 Yopu do know that we have always had a lot of class II and Class III trip every day of ALF. We have large support group and if your lost tribers have halfass winter gear at all they would have a ball. I full exspect you to bring some of the Scoutmaster at a min. We just meet in a parkin lot and see what is runnin some go to one run some go to the other and later that day we get together and lie about what we did,

RodeoClown · Post by **RodeoClown** » Mon Feb 01, 2010 9:14 pm

Louie wrote: Blackfly looks like the OCA, you mean the CU Fly, right?

Nah, it's just a shortend Spanishfly with a different rocker profile, slicier ends, and an asymmetric hull.

philcanoe · Post by **philcanoe** » Mon Feb 01, 2010 9:54 pm

RodeoClown wrote: Nah, it's just a shortend Spanishfly with a different rocker profile, slicier ends, and an asymmetric hull.

oh... same width, must be a copy?

SkeeterGuy86 · Post by **SkeeterGuy86** » Tue Feb 02, 2010 12:46 am

Louie wrote:Lost Tribe skeeter guy 86 Yopu do know that we have always had a lot of class II and Class III trip every day of ALF. We have large support group and if your lost tribers have halfass winter gear at all they would have a ball. I full exspect you to bring some of the Scoutmaster at a min. We just meet in a parkin lot and see what is runnin some go to one run some go to the other and later that day we get together and lie about what we did,

yeah louie i want to get a group to go this year .... as far as whats running ill paddle anything i just will brace and if need be i can swim

im in the process of adding more foam to my boat so i can sit comfortable while using the bulkhead ....

as far as getting a few scoutmasters out .... its in the works

Mike W. · Post by **Mike W.** » Tue Feb 02, 2010 12:47 am

horizongfx wrote: Speaking of Fixin Kayacks, I'm Fixin this one now. I Even Fixed the Graphics. I now call it the Sleazy CZ-1, I'm Gonna Weld some Hip Grabbers on this Puppy too !

I'm going to ask the stupid question. How'd you do that? Grind off the part you didn't want?

horizongfx · Post by **horizongfx** » Tue Feb 02, 2010 1:57 am

Mike W. wrote:
horizongfx wrote: Speaking of Fixin Kayacks, I'm Fixin this one now. I Even Fixed the Graphics. I now call it the Sleazy CZ-1, I'm Gonna Weld some Hip Grabbers on this Puppy too !
I'm going to ask the stupid question. How'd you do that? Grind off the part you didn't want?

Bingo

Mike W. · Post by **Mike W.** » Tue Feb 02, 2010 2:35 am

THANKS!!! I'm going to try it. I think I've got a little sanding drum for my Dremmel. That should do the trick. My lettering on the side is different from yours since mine is one of the early boats. I'll figure out something.