g-flex + twintex?
Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin
Scott, I reglued the bag tie down patches in a Zephyr with the 3M adhesive Esquif recommends (I forgot the numbers). Eli was good enough to loan me the applicator and sold me a couple of applicator tubes @ $1 each(sold only in large quantities by 3M). A tube of the 2 part adhesive costs about $30 from 3M's online store. It did a good job but was verydifficult to work with.
I never had much luck with anything sticking to Twintex, even after flaming the area.
Frustrated from constantly re-installing thigh strap anchors in my Zephyr, I took a 3/8 drill bit to the hull, and installed a center seatbelt from an 87 Nissan Sentra. I made a minicell thigh wedge, and now I wish I had the same outfitting in my other boats!
Frustrated from constantly re-installing thigh strap anchors in my Zephyr, I took a 3/8 drill bit to the hull, and installed a center seatbelt from an 87 Nissan Sentra. I made a minicell thigh wedge, and now I wish I had the same outfitting in my other boats!
Jeff
g-flex- twin tex
Hi, use the 3M two component but you have to vacuüm the hole proces. Regards Kris