gunnels holes in wrong place
Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin
-
- c
- Posts: 17
- Joined: Sun Jan 08, 2012 11:19 pm
- Location: Asheville NC
gunnels holes in wrong place
screwed up and drilled right side lash holes about 2" forward of the left side. so i decided to drill some other ones so the lashing would be straight, had i done it in the stern i would not have worried about. how does this look? the second rope is a dummy string filling the holes drill by the dummy. i could drill some more holes on the other side to match the screw up ones. i have taken forever getting this thing outfitted just so i can go throw it around on the rocks this weekend.
- Attachments
-
- photo 2.JPG (33.2 KiB) Viewed 3819 times
Re: gunnels holes in wrong place
I wouldn't worry about it.
I have spent too much time in the past obsessing over such things and in hindsight, once you get some river time on it and bang it around a bit you won't care one bit. It looks like a good job and is not going to be seen unless someone is looking really close.
I have spent too much time in the past obsessing over such things and in hindsight, once you get some river time on it and bang it around a bit you won't care one bit. It looks like a good job and is not going to be seen unless someone is looking really close.
~Aaron~
Just being willing to try is half the battle.
Just being willing to try is half the battle.
Re: gunnels holes in wrong place
As long as it floats, right. Don't stress the little things.
Team Blackfly
http://www.blackflycanoes.com/" onclick="window.open(this.href);return false;
http://www.astraldesigns.com/" onclick="window.open(this.href);return false;
http://www.immersionresearch.com/" onclick="window.open(this.href);return false;
http://www.blackflycanoes.com/" onclick="window.open(this.href);return false;
http://www.astraldesigns.com/" onclick="window.open(this.href);return false;
http://www.immersionresearch.com/" onclick="window.open(this.href);return false;
Re: gunnels holes in wrong place
No drinking or mind altering susbstances while working on outfitting!
It must bother you or you wouldn't have posted this. Why not add the same holes on the other side and make it symetrical?
It must bother you or you wouldn't have posted this. Why not add the same holes on the other side and make it symetrical?
Re: gunnels holes in wrong place
You don't paddle esthetics
Re: gunnels holes in wrong place
Why not tie a knot in the hole instead of looping cord from one hole to the other or leave the holes empty.
Re: gunnels holes in wrong place
You can fill unused holes with thickened G-flex epoxy. Eric Nyre says that, over a number of years, exposure of the foam to water causes it to lose its elasticity. But you'll probably batter the boat to death before then.
-
- c
- Posts: 17
- Joined: Sun Jan 08, 2012 11:19 pm
- Location: Asheville NC
Re: gunnels holes in wrong place
i am not messing with it. i am gluing the saddle in tonight and one more coat of tung oil and then we are going to go jump some rocks on friday at the nolichucky. ill post a finished pic when she is done. thanks all.
Re: gunnels holes in wrong place
What time you puttin on?
Re: gunnels holes in wrong place
If you hadn't called yourself out, I bet nobody would have noticed! As long as it will hold the bags in, you're good to go.
-Anthony
"I'm gonna run this one river left I think.... So far river left, that I'm gonna be on the bank. With my boat on my shoulder."
"I'm gonna run this one river left I think.... So far river left, that I'm gonna be on the bank. With my boat on my shoulder."
Re: gunnels holes in wrong place
My boat's got a HUGE hole in the top.
Still floats OK when it's right-side up.
Happy paddling.
Still floats OK when it's right-side up.
Happy paddling.
- Todhunter
- Ridge Spirit Outfitting
- Posts: 768
- Joined: Fri Aug 21, 2009 11:42 am
- Location: Chattanooga, TN
Re: gunnels holes in wrong place
My bag cage lines are crooked. Never had anyone (but me) point it out. Who knows...you might start a trend....
Matt Todhunter
Ridge Spirit Outfitting - Custom Bulkhead Canoe Saddles
Ridge Spirit Outfitting - Custom Bulkhead Canoe Saddles
-
- C Maven
- Posts: 1447
- Joined: Tue Apr 13, 2004 2:39 am
- Location: Northern California
Re: gunnels holes in wrong place
if you look close enough, everything in canoes and kayaks is crooked.
Larry