Boat trim....

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: adamin, kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC

Post Reply
User avatar
PAC
CBoats.net Staff
Posts: 3311
Joined: Thu Nov 07, 2002 1:07 am
Location: Pittsburgh, PA

Boat trim....

Post by PAC » Wed Apr 19, 2006 9:43 pm

The post and discussion as to the new shorter race boats, reading the relating design info 8) , and some recent unplanned time in a hole :roll: , got me thinking about boat trim.

What do folks like in terms of trim....
A. Bow heavy
B. Stern heavy
C. Neutral
D. Trim... what the heck is trim
E. Just happy the darn thing is floating

Feel free to elaborate per type of boat OC and C (i.e.: creeker, river runner, play, squirt, etc.).

I have my thoughts and preferences but looking to see what others think and why (could this change my thinking.. probably :wink: )!

Thanks in advance!

Paul C.
Paul C.
Cboats Moderator
Official TOG Member (Team Old Guy)!

bearboater
CBoats Addict
Posts: 743
Joined: Mon Oct 11, 2004 4:22 am
Location: Phoenix, AZ

Post by bearboater » Wed Apr 19, 2006 10:00 pm

my flirt C. (c1 conversion playboat) is a bit to the back, but mostly neutral, so that it sits fairly flat when hole riding etc.

my fink between B. and C. (creeker) is a bit to the rear, but i want to move it a bit forward to that it is still to the rear, but a bit less so, i want to keep a light bw, bow the stern catches a bit much as is.

zealot C. (race) is about neutral, but the design is such that the bow sits a bit higher than the stern so ti works out, and when you spring the bow rises quite a bit.

cheers
race boats are so fast, i bet its in the speed wing.

User avatar
yarnellboat
C Maven
Posts: 1330
Joined: Wed Apr 06, 2005 8:54 pm
Location: Winnipeg
Contact:

Post by yarnellboat » Wed Apr 19, 2006 10:07 pm

I like my boats just stern-side of neutral.

I can see where I'm wearing out my Outrage bottom towards the stern, so I'm adding a shim on the saddle to trim it more neutral.

P.

billcanoes
CBoats Addict
Posts: 750
Joined: Mon Apr 12, 2004 5:59 pm
Location: Charlotte, NC

SternHeavy

Post by billcanoes » Wed Apr 19, 2006 11:38 pm

I like my boats stern heavy- though not as much as the longboating crew- - My factory outfitted viper 11 came bow heavy and it was very slow and WET-

User avatar
Tiggy
C Guru
Posts: 156
Joined: Mon Mar 14, 2005 3:15 pm
Location: Steamboat Springs, Colorado

Post by Tiggy » Thu Apr 20, 2006 1:01 pm

Theres no stern/neutral its neutral or freakin stern, sheesh.

Open boat slightly stern/ C-1 neutral.

When Im swimming it doesnt occur to me.... :roll:
"Don't Panic"

<a><img></a>

jscottl67
CBoats Addict
Posts: 444
Joined: Fri Sep 02, 2005 7:16 pm
Location: Tampa, FL

Post by jscottl67 » Thu Apr 20, 2006 4:20 pm

I prefer neutral or very lightly biased to the stern.

Main thing is that the part of me closest to the sky looks likes :) and not like (_|_).


Jeff :P

Aric
Pain Boater
Posts: 92
Joined: Wed Aug 06, 2003 9:06 pm
Location: Summit, CO

Post by Aric » Thu Apr 20, 2006 8:23 pm

I try to find the balance between pearling and unintentional stern squirts. :lol: most of my conversions have ended up 1/2" stern heavy. I'd rather think about my stern edges than pearl.
Aric

Post Reply