C-Forum

I am deconstructing a WS Z C-1 and am putting the parts into a Remix 69. I put a 32 " Kevlar piece on the cockpit floor from the deck, across the floor and up the other side to the deck. It worked great for attaching, D rings, knee cups, straps, esp the Northwater 2 point strap where there is tension on the front one holding your knee down. The Kevlar did not bond to the hull but was stiff enough that it was some work getting it out. I got this method from Bernie 8 years ago and want to say it worked great. I'll send a pic when complete.