Page 1 of 1
Kevlar Sunburst
Posted: Wed Apr 15, 2009 11:40 pm
by vzap
I finally got the Kevlar Sunburst I've had my eye on for several months and would like to get more info on its original layout. It is presently rigged w/ a solo pedistal but it has holes drilled into the gunnels as if there had been a seat mounted in the front and in the rear. If anyone out there CBoat world knows anything about this boat or knows anyone who might please PM me.
Thanks,
Vince Zappia
Posted: Thu Apr 16, 2009 12:48 am
by craig
Maybe it had a perception saddle hung from the thwarts?
Posted: Thu Apr 16, 2009 1:20 am
by vzap
Didn't explain the situation properly. There are three holes in the gunnel on each side of the boat and on each end of the boat; 12 holes total. Sort of like there might have been an adjustable seat fore and aft.
See ya at ALF again next year.
Posted: Thu Apr 16, 2009 1:28 am
by KNeal
The original Sunburst I had (the "1") had a solo kneeling thwart mounted to the gunwales. Could be yours had a tandem setup that way? There may be marks a few inches below those holes where the thwarts would have rubbed against the hull.
More $0.02,
KNeal
Posted: Fri Apr 17, 2009 10:29 pm
by vzap
That's a logical explaination. I'll check for the marks.
Thanks