River Elf C-1 Spray Skirts

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin, kenneth, sbroam

Post Reply
River Elf C1s
Pain Boater
Posts: 50
Joined: Mon Jul 28, 2014 2:45 am

River Elf C-1 Spray Skirts

Post by River Elf C1s »

Hey Fellow C-Boaters!
Starting in 2022 we are going to start building C-1 spray skirts. As many of you know, C-1 skirts have been very hard to come by these days. With the closure of Snap Dragon (who had been providing custom skirts for our C-1's) we found ourselves in a tough spot and have decided to no longer be dependent on anyone for skirts that fit our rims. What good is a C-1 without a skirt?

Our intention is to offer three deck sizes: a large size designed specifically for our Storm Chaser C-1's and Storm Giant C-2 (and other boats), a medium size to fit most modern slalom C-1's, and a small deck size designed specifically for all of the older vintage C-1's that are still out there that have smaller cockpits.

During January we will begin building the larger deck size for many of our recent (very patient) customers who need skirts for their River Elf boats.

We are shooting for early-mid February to begin taking orders for everyone else.

In the meantime, you can help us! We are wanting to catalog deck sizes of various C-1's to help us decide on the medium and small cockpit dimensions for our skirts. This information will also help us to develop a "fit list" so you can choose the most appropriate deck size for your boat. We are hoping to stay away from custom built skirts but have not ruled that out. Since there are a number of kayak skirt manufacturers out there, we also don't intend to provide skirts for conversion kayaks (at least not in the beginning). If you want to contribute to the catalog, send us the following info: make and model of your Cboat, maximum inside length and width of your C-1 cockpit and circumference of the rim. To measure the circumference, use a rope and place it tight under the rim of your boat and pull it around until it reaches the starting point - measure that length. Send your specs and measurements to info@riverelf.com (or post here) and we will compile the list. So, if you need a skirt for your C-1, send us the information so that we can be sure to include your favorite design!

I will update this thread again in February when we are ready to start taking orders. See attached picture for our "proof of concept" skirt - it's not the final finished product but will give you an idea of what to expect. Thanks for your help!
Attachments
riverelfskirtprototype.JPG
Chris
River Elf
http://www.riverelf.com
User avatar
Kelly-Rand
CBoats Addict
Posts: 357
Joined: Wed Nov 13, 2002 6:55 pm
Location: Boston MA

Re: River Elf C-1 Spray Skirts

Post by Kelly-Rand »

I like the "Rapid Style" of the skirt. I found that style to be much better at keeping water out on those long surfs that bury the bow.
Jim KR

"with single blade in hand
a C-1 I will stand"
User avatar
poetry_heckler
Pain Boater
Posts: 72
Joined: Fri Aug 30, 2019 9:01 pm
Location: Hudson Valley and Brooklyn, NY

Re: River Elf C-1 Spray Skirts

Post by poetry_heckler »

Very excited about this.

Do you have an idea of how much these are going to cost?
ASPIRIN SANDWICH
River Elf C1s
Pain Boater
Posts: 50
Joined: Mon Jul 28, 2014 2:45 am

Re: River Elf C-1 Spray Skirts

Post by River Elf C1s »

Thanks for the comments.

Jim, I'm assuming by "rapid style", you are referring to the extra material extending beyond the bungee? Anything else that you all would like to see?

Right now, we plan to start with a fairly basic skirt to fill the immediate need and then perhaps later on offer a more high end style skirt.

Regarding price, we haven't yet settled on that. We are using the next few weeks to dial in how long it takes for us to make each skirt. So that will be important. This is also going to be on a fairly small scale to begin with so our materials costs will be a little higher than the larger manufacturers who have been doing this for a while and do very large volumes. But, having said that, we still hope to offer these at a reasonable price and give C-boaters a reliable, go-to place to find a skirt whenever you need one.

Reminder to send us your cockpit rim sizes if there is a specific boat you'd like us to consider for our standard deck sizes. Avoiding, one-off, custom skirts in the future will help us keep the cost down. Thanks!

Chris
Chris
River Elf
http://www.riverelf.com
User avatar
Kelly-Rand
CBoats Addict
Posts: 357
Joined: Wed Nov 13, 2002 6:55 pm
Location: Boston MA

Re: River Elf C-1 Spray Skirts

Post by Kelly-Rand »

Jim, I'm assuming by "rapid style", you are referring to the extra material extending beyond the bungee? Anything else that you all would like to see?
I like the bungee on top with the fringe extending as shown. I only have one skirt of that style and it is the driest of those I have. I don't think the fringe has to extend further than you show as its effectiveness is a combination of the bungee and the water pressure pushing the material against the rim and deck.
Jim KR

"with single blade in hand
a C-1 I will stand"
wildwaterc2
Pain Boater
Posts: 87
Joined: Thu Sep 09, 2004 4:16 pm
Location: Roanoke VA

Re: River Elf C-1 Spray Skirts

Post by wildwaterc2 »

Thanks for your support of this need for the C-boat community.
River Elf C1s
Pain Boater
Posts: 50
Joined: Mon Jul 28, 2014 2:45 am

Re: River Elf C-1 Spray Skirts

Post by River Elf C1s »

Thanks ya'll. We certainly appreciate your support of River Elf over the last several years! We are glad to help out.

We have the large and medium deck sizes defined but I have not yet designed the jigs for the "small" deck size. I am thinking something that would fit older 4m (90's style) slalom boats, late 80's squirt boats (and even before) ... for example: the 92 Fanatic, Dagger Zealot, Acrobat, etc. I once owned these boats years ago, but no longer do. If anyone is interested in a skirt for this style boat, let me know and send me some specs (or a template) if you can. Or, if you have an old skirt that would fit these older designs, let me know. I would be happy to buy it from you.

I believe bush sport was making small deck skirts like this at the time and snap dragon was building a bib style C-1 skirt (some in hypalon) in the 90's as well. I'm thinking something along those lines. If anyone has one of these they don't need let me know. This would give me something to use a model for the small deck size.

We completed the first "finished" skirts last week. I'll post some pics soon of the final product. I think we are still looking good for early Feb to begin offering for sale. Thanks
Chris
River Elf
http://www.riverelf.com
River Elf C1s
Pain Boater
Posts: 50
Joined: Mon Jul 28, 2014 2:45 am

Re: River Elf C-1 Spray Skirts

Post by River Elf C1s »

Here are a few pictures of the finished Large deck size skirt. It was designed specifically for the Storm Chaser C-1 and Storm Giant C-2 but should fit most larger cockpit C-1's. The medium size deck is also complete and we'll post a few pics soon.
Attachments
pic1.JPG
pic2.JPG
pic3.JPG
Chris
River Elf
http://www.riverelf.com
Bob P
CBoats Addict
Posts: 770
Joined: Thu Jan 16, 2003 10:04 pm
Location: Connecticut

Re: River Elf C-1 Spray Skirts

Post by Bob P »

Could you post each size's dimensions: circumference, nominal length and width please?
Bob P
TomPea
Posts: 3
Joined: Sun Aug 15, 2021 6:27 pm
Location: Betw Asheville & Erwin TN

Re: River Elf C-1 Spray Skirts

Post by TomPea »

Looking forward to these. Thanks for your efforts.
Post Reply