source for grunch pads

chuckneese · Post by **chuckneese** » Tue Oct 04, 2005 6:21 am

I recently purchased a "new to me" OC1 and need to put grunch pads on it. Any suggestions on where to get the materials and what to use?

bearboater · Post by **bearboater** » Tue Oct 04, 2005 9:20 pm

first and only what the hades are grunch pads?
cheers
-isaac

chuck naill · Post by **chuck naill** » Tue Oct 04, 2005 11:38 pm

River Sports in Knoxville used to have them for about $65, 865-523-0066. I think that they are made by Dagger/Harmony companies.

TNpaddler30 · Post by **TNpaddler30** » Wed Oct 12, 2005 2:07 am

here is a link for grunch pads/ skid plates,

http://boc123.com/store/BOC_store.cfm?ItemId=15805.

they also work GREAT for repairs to royalex. Had a light bulb burn a hole all the way through my Dagger Impulse, put the kevlar pad on both sides and the epoxy set up just fine, no leaks at all....not the prettiest patch but it worked.

Randy Dodson · Post by **Randy Dodson** » Wed Oct 12, 2005 7:02 pm

bearboater wrote:first and only what the hades are grunch pads?
cheers
-isaac

SKID PLATES

Post by **sbroam** » Wed Oct 12, 2005 8:55 pm

Surprised nobody had said Sweets yet : http://johnrsweet.com/

He has instructions : http://johnrsweet.com/Tips.html

And will sell you the raw materials.

ChrisKelly · Post by **ChrisKelly** » Wed Oct 12, 2005 9:11 pm

make sure you need them.

I think it is a mistake to put them on to prevent rather then to repair. They hurt performance and why give that up before you need to. I have done this and have been sorry. Chris Kelly

bearboater · Post by **bearboater** » Thu Oct 13, 2005 3:06 am

after further develiopement if the conversation, i figured otu what it was. i have them on neither of my boats, though now i only have C-1's, so they will never go on them.
cheers
-isaac

C-Forum

source for grunch pads

source for grunch pads

??

river sports

Re: ??

You can buy them or make your own but first

yes