2 Acrobats for sale 1/2" cut & master cut

Mike W. · Post by **Mike W.** » Tue May 23, 2006 4:16 am

Yeah, I'm going to have a new boat built & am going to send these squirt boats to new homes.

1/2" cut, 4/5 layup. Green/blue/white diamond pattern w/ bunches of metal-flake on the deck. Black hull & seams. Built by New Wave. Seams at bow & stern were re-done by a previous owner (these can be seen in the photos). Hull has a patch near the stern. Seat, knee pads & thigh-straps. It's the green/blue/white boat in these photos: http://cboats.net/c_db/view.php?name=Ac ... oat_id=255
Outfitting has been completely re-done since these photos were taken. $400

Master cut Acrobat. Built by New Wave. I'm not sure on the lay-up for this one (there's a knee pad over the label). Black deck & hull. Seams are red except for where it's been repaired at/near the stern. There the seams are yellow w/ metal-flake & black w/ metal-flake (separate repairs). This boat has seat, knee-pads, lap-belt & knee block. I can take photos & send them if you want. $350

Both boats are in Roanoke Rapids, NC & can be delivered to the Armada.

squeakyknee · Post by **squeakyknee** » Wed May 24, 2006 1:02 am

We should talk soon

.

Mike W. · Post by **Mike W.** » Wed May 24, 2006 1:50 am

You need to call me. I already have a bite on the Master Cut.

Mike W. · Post by **Mike W.** » Thu Jun 01, 2006 2:59 am

1/2" cut is sold. The master cut is still available.