Replacement for Attwood V1250 Bilge Pump

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin

Post Reply
sandyos
c
Posts: 10
Joined: Sat Jun 24, 2006 2:23 am
Location: St. Louis MO

Replacement for Attwood V1250 Bilge Pump

Post by sandyos »

Looks like Attwood does not make the 1250 anymore? I am building a new pump system and need some suggestions on a good bilge pump to use since I can't find a 1250.

thanks,
Sandy
Louie

Post by Louie »

Save on battery weight and go with ...................a bleach bottle
User avatar
marclamenace
CBoats Addict
Posts: 711
Joined: Fri Nov 14, 2008 5:28 pm
Location: Quebec, Canada

Post by marclamenace »

I think the tsunami range of pump attwood makes must be replacing the older models.

I have a setup with the Tsunami, highly recommend it. Won't stop pumping when air gets in the pump, easy to disassemble to remove dirt or other stuff. Looking at the specs it seems the tsunami pumps slower but once setted it looked faster to me than the older models (?)

Love it. Got some pictures Here.
Watch out; that river has rocks on the bottom. :o
ncdavid
CBoats Addict
Posts: 738
Joined: Tue Sep 09, 2003 6:48 pm
Location: mooresville, nc

Post by ncdavid »

I like the Tsunami 1200. Works fine. Not as bulky as the V1250. Eats battery life faster. Not an issue for most folks but I'm still using a small SLA battery. Not as cheap as the V1250, but still only about $40.
Larry Horne
C Maven
Posts: 1447
Joined: Tue Apr 13, 2004 2:39 am
Location: Northern California

Post by Larry Horne »

i'm kind of jealous of you all with these pump things, but not quite enough to go back to oc :wink:
i'm curious. are they really reliable, or do you have to fidget with them a bunch.
Larry
User avatar
Alan S
C Boater
Posts: 40
Joined: Mon Jun 08, 2009 8:51 pm
Location: Montana

Post by Alan S »

I couldn't find the Attwood 1250 so I bought the Tsunami 1200 for a new boat. I also got the impression that the Attwood line was phased out in favor of the Tsunami pump. I was surprised at how small the Tsunami is by comparison -- maybe a third the size. That leaves a few more mounting options. Don't know about how fast it runs down the battery yet. The Attwood runs for days on a modest SLA battery.
golder
CBoats Addict
Posts: 258
Joined: Wed Sep 12, 2007 1:52 am
Location: Asheville, NC

Post by golder »

larry,

my pump doesn't need fidgeting. i just take the battery out at the end of the day and charge up again for the next time. other than that, i just flip a switch when i want to dry out.

that said, there was a period of fidgeting at first, getting things into the right place and then to stay there. it takes me about 15 minutes or so if i want to take it out and move it to another boat.

pretty easy, saves a lot of energy for paddling. that said, i've been thinking about a decked boat some myself....

i better knock on a thwart or gunnel. now that i've said that, i hope my pump doesn't get sketchy and need attention.
ain't nothin but water, rocks, and gravity
Larry Horne
C Maven
Posts: 1447
Joined: Tue Apr 13, 2004 2:39 am
Location: Northern California

Post by Larry Horne »

nice, someday I may kick the spiders out of my viper and set one of those up.
Larry
User avatar
yarnellboat
C Maven
Posts: 1331
Joined: Wed Apr 06, 2005 8:54 pm
Location: Winnipeg
Contact:

Post by yarnellboat »

Larry,

If you've got a perfectly good Viper that's been taken over by spiders, maybe you should bring it when you come north, sell it to me, and I can put a pump in it! :P The spiders would find a new home, just don't bring any across the border.

Several of my friends have pumps, slightly different systems with varying degrees of fidgetiness, I haven't compared them in detail. A guy with a zero-fidget system and a small battery that's good for 2 full runs/days may do an assembly line with some us who have been meaning to install pumps. He swears it's a 1-2-hr job and costs not much over $100.

Pat.
User avatar
Smurfwarrior
C Maven
Posts: 1491
Joined: Mon Dec 14, 2009 3:09 am
Location: Utah

Post by Smurfwarrior »

I have the Tsunami 1200 and it emptys my Zoom in about 30-45 seconds. I added a Battery Tender to the battery, with a pigtail attached to the battery. I just plug the pigtail into the charger cord and bingo, no having to remove the battery of fiddle with it to charge it.
User avatar
Marc Evans
C Guru
Posts: 241
Joined: Wed May 11, 2005 6:01 pm
Location: Pullman, Washington

Post by Marc Evans »

Larry,

I have an Attwood V1250 powered by a homemade battery pack holding 12 rechargeable AA batteries (14.4 volts). Ran the Main Salmon last year in my SFly and the system was still pumping after 7 days. I use it all of the time and am very happy for it. Go through the big stuff or play and you don't need to dump on shore unless you want to. Lets me do stupid stuff I wouldn't normally try unless I was willing to go to shore.

I just plug in the battery and go - no prolems, except for a switch that went bad (my fault).

Marc
User avatar
marclamenace
CBoats Addict
Posts: 711
Joined: Fri Nov 14, 2008 5:28 pm
Location: Quebec, Canada

Post by marclamenace »

Just a comment but I've had the same pump setup marc just mentionned, and I would add that the pump has helped me progress a lot too. As a newbie you can eventually spend quite a bit of time trying to improve your paddling concentrating mainly on not flipping (duh) and for that purpose not getting water in.

Then when a pump (or a skirt) and a roll shows up, you find yourself in a totally different world. Fun, fun and more fun. :D

I know Louie and the GDI scarface team over here won't agree, loves to swim and bouncing on rocks but every its style I guess. :o
Watch out; that river has rocks on the bottom. :o
Post Reply