Best to Seal Switch for Bilge Pump?

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin

Post Reply
User avatar
fleckbass
CBoats Addict
Posts: 306
Joined: Mon Jun 04, 2007 2:35 am
Location: North Huntingdon, PA
Contact:

Best to Seal Switch for Bilge Pump?

Post by fleckbass »

What is best to seal the switch for Bilge Pump. I used a big gob of Silicone in the past. What have others found to work well?
I went raftin' once. I think it was in Ohio.

http://www.easternpaddling.com
User avatar
horizongfx
CBoats Addict
Posts: 408
Joined: Mon Mar 26, 2007 11:08 pm
Location: Chattanooga, TN
Contact:

The Very Best I found thus Far

Post by horizongfx »

Not the Cheapest, But The Most reliable I found thus Far.
And the One I use in all My Pump set-ups.


https://www.alliedelec.com/search/produ ... KU=8261003
For me; boating brings me closer to to something divine, and in a open canoe I'm 8 Inches closer.
...........O
......(___|/____)
............/.............
User avatar
sdbrassfield
Supporting Paddler
Posts: 214
Joined: Thu Jul 14, 2005 11:51 am
Location: Flatwater, North Carolina

Post by sdbrassfield »

I have always bought a marine grade switch for mine...
SYOTR
User avatar
PAC
CBoats.net Staff
Posts: 3313
Joined: Thu Nov 07, 2002 1:07 am
Location: Pittsburgh, PA

Post by PAC »

I just buy off the shelf at the hardare store and goop the bugger. Seems to work well and cheaper in the long run.... at least for me.
Paul C.
Cboats Moderator
Official TOG Member (Team Old Guy)!
User avatar
marclamenace
CBoats Addict
Posts: 711
Joined: Fri Nov 14, 2008 5:28 pm
Location: Quebec, Canada

Post by marclamenace »

After two switch failing even beeing really nice sealed I am going marine switch on my next one too. With succion/pressure from temp changes water's always getting in somehow. :evil:
Watch out; that river has rocks on the bottom. :o
User avatar
Smurfwarrior
C Maven
Posts: 1491
Joined: Mon Dec 14, 2009 3:09 am
Location: Utah

Post by Smurfwarrior »

I like to use Marine rocker switches ($25ish) after going through a bunch on heavy duty normal switches both sealed and unsealed. My biggest issue is damaging the switch by hitting it. Rocker switches that are countersunk into foam are the answer.
jottsee
Pain Boater
Posts: 78
Joined: Sun Jul 08, 2007 9:23 pm
Location: Milwaukee, WI

Switch

Post by jottsee »

Standard 99 cent light switch - just don't use it in the ocean.
User avatar
iRolled
BlackFly Canoes
Posts: 425
Joined: Sat Mar 15, 2008 11:27 pm
Location: Lenoir City, TN

Post by iRolled »

I second the .99 cent light switch from home depot. Fancy $10-20 waterproof switches dont last long. a cheap light switch has solid connections and will last a long time. I dont even waterproof any of the connections in any of my boats unless you're using lithium batteries. keep them dry.

if you get the light switch. take a pair of pliers and bend the ears a few time to break them off. These switches aren't bulky at all.
Team Blackfly
http://www.blackflycanoes.com/" onclick="window.open(this.href);return false;
http://www.astraldesigns.com/" onclick="window.open(this.href);return false;
http://www.immersionresearch.com/" onclick="window.open(this.href);return false;
User avatar
dafriend
C Guru
Posts: 152
Joined: Sun May 08, 2005 10:44 pm
Location: St. Paul, Minnesota

Post by dafriend »

User avatar
Todhunter
Ridge Spirit Outfitting
Posts: 768
Joined: Fri Aug 21, 2009 11:42 am
Location: Chattanooga, TN

Post by Todhunter »

http://www.aircraftspruce.com/catalog/e ... switch.php

...but Spruce is 5 minutes from my house.
Matt Todhunter
Ridge Spirit Outfitting - Custom Bulkhead Canoe Saddles
User avatar
Jim Michaud
CBoats Addict
Posts: 318
Joined: Tue Mar 11, 2003 3:24 am
Location: Vernon, Connecticut

Post by Jim Michaud »

I've even had a Marine waterproof switch fail on me. Now I go to Ace hardware and buy a regular toggle switch and a bottle of Re-Rack. Re-Rack is the stuff that is used to repair dishwasher racks when the coating starts to wear off. The bottle has a little brush connected inside the cap. I give the switch lots of layers of Re-Rack. I haven't had a bad switch since.

Jim
User avatar
sbroam
CBoats.net Staff
Posts: 3969
Joined: Thu Nov 07, 2002 2:12 am
Location: Lexington, SC
Contact:

Post by sbroam »

THinking about batteries and switches again, I searched the forum and came up with these :

http://www.batteryspace.com/component-s ... ector.aspx

that would go with these...

http://www.batteryspace.com/waterbottle ... eplug.aspx

http://www.batteryspace.com/connectorad ... lcord.aspx


Hmmm...
User avatar
horizongfx
CBoats Addict
Posts: 408
Joined: Mon Mar 26, 2007 11:08 pm
Location: Chattanooga, TN
Contact:

Waterproof

Post by horizongfx »

Not sure how waterproof That Bottle is !, I can tell you from My experience that those Poly-switches and PCB's that are mounted to the Batteries via a Circuit board Absolutely cannot get wet.
For me; boating brings me closer to to something divine, and in a open canoe I'm 8 Inches closer.
...........O
......(___|/____)
............/.............
User avatar
fleckbass
CBoats Addict
Posts: 306
Joined: Mon Jun 04, 2007 2:35 am
Location: North Huntingdon, PA
Contact:

Post by fleckbass »

:o I just got one of the waterproof bottles. Hopefully it works out. anyone have problem with them? The one thing I don't care for is the hard wired cable comming out of it. Looks like headphone cable. I had to strip some insulation off to strip the conductors a bit. Didn't care for it. Was thinking about removing it and putting my own cable on but the bottle is sealed shut. If this thing craps out, I will have to hack it apart.
I went raftin' once. I think it was in Ohio.

http://www.easternpaddling.com
Post Reply