Edge OC-1

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin

Post Reply
granola1861
c
Posts: 12
Joined: Mon Jul 11, 2011 3:06 am

Edge OC-1

Post by granola1861 »

I have an Edge OC-1 and I have a question about it. If someone has one or knows of anyone with one please 'pm' me.

Thanks much in advance!
Top
User avatar
jakke
CBoats Addict
Posts: 466
Joined: Mon Nov 26, 2007 12:21 pm
Location: Belgium
Contact:
Contact jakke

Post by jakke »

You mean the fiber slalom Edge?

I know someone paddling such an OC1 but he's not active here though.
Top
User avatar
eddyhops
CBoats Addict
Posts: 315
Joined: Tue Apr 15, 2003 3:39 pm
Location: Alabama

Re: Edge OC-1

Post by eddyhops »

granola1861 wrote:I have an Edge OC-1 and I have a question about it. If someone has one or knows of anyone with one please 'pm' me.
How personal is this question? Why not just ask?
JD
Top
User avatar
Craig Smerda
L'Edge Designer
Posts: 2815
Joined: Tue Dec 10, 2002 3:59 am
Location: WaUSAu Wisconsin USA North America Earth, etc.

Post by Craig Smerda »

paging Phil...
Esquif Canoes Paddler-Designer-Shape Shifter
Top
User avatar
philcanoe
C Maven
Posts: 1549
Joined: Tue Feb 24, 2004 1:15 am
Location: top o'da boat - Reids, AL

Post by philcanoe »

Had already sent a PM...

...but I'm with John - as to why the secrecy. :roll:
    ^~^~^ different strokes ~ for different folks ^~^~^
    Top
    granola1861
    c
    Posts: 12
    Joined: Mon Jul 11, 2011 3:06 am

    Post by granola1861 »

    Sorry for the "secrecy" guys. Nothing malicious meant at all. I just wanted to connect to someone with whom I could get some measurements on an Edge. I'm wondering if my saddle is in the correct location and curious about thwart lengths.

    Thanks for the feedback.
    Top
    User avatar
    philcanoe
    C Maven
    Posts: 1549
    Joined: Tue Feb 24, 2004 1:15 am
    Location: top o'da boat - Reids, AL

    Post by philcanoe »

    For thwarts - I make boat width as measured from side to side 24inches. That is to say from the fiberglass sandwiched between gunwale on one side, to the fiberglass/kevlar/composition on the other side.

    On the boat at hand - my front/bow thwart measured at 67 1/4" inches..... and the stern/rear thwart 66 inches (precisely 65 7/8ths). These could vary with saddle length. More importantly for my weight, height, arm length, torso, style, opinion ... I like to sit 3inches back from center.

    Good luck & enjoy - these are really nice handling boats, with a not so easily duplicated feel.
      ^~^~^ different strokes ~ for different folks ^~^~^
      Top
      Post Reply

      Return to “CBoat C Forum”