Air bag plugs

Decked Canoes, Open Canoes, as long as they're canoes!

Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin

Post Reply
Einar
CBoats Addict
Posts: 398
Joined: Sun Apr 18, 2010 8:02 pm
Location: British Columbia

Air bag plugs

Post by Einar »

Anyone bought airbag plugs as replacements.
I ripped on off during a roll and am looking for a replacement plus a couple of spares.
My bag is a 70" Harmony.
Thanks

By the way the Cascade, Idaho watersports park (4 surf waves) is great, a bonus add on to the
West Fest.
Attachments
P1000824.jpg
P1000824.jpg (20.19 KiB) Viewed 5833 times
Paddling is easy, organizing shuttles is hard.
Not misplacing all your crap in somebody else's car seems to be even harder
User avatar
Mike W.
CBoats.net Staff
Posts: 2206
Joined: Fri Jan 03, 2003 10:52 pm
Location: Roanoke Rapids, NC
Contact:

Re: Air bag plugs

Post by Mike W. »

I wonder if you could cut them out of water bags: http://www.doheny.com/poolsupplies/sku-9959p.html" onclick="window.open(this.href);return false;

These generally only hold water a couple of winters, then the bag is junk.
User avatar
Marc Evans
C Guru
Posts: 241
Joined: Wed May 11, 2005 6:01 pm
Location: Pullman, Washington

Re: Air bag plugs

Post by Marc Evans »

Einar, measure the diameter. I think I have one in a bag that had the fill tube pulled out. It is at my storage unit, so I'll check tomorrow.

Marc
User avatar
Acosi151
Pain Boater
Posts: 63
Joined: Mon Sep 06, 2010 7:38 pm
Location: New Brunswick, CAN

Re: Air bag plugs

Post by Acosi151 »

I think they're called "BOSTON PLUGS"

I've seen the same thing on paintball obstacles.. maybe able to find some through a paintball place too..
User avatar
ohioboater
CBoats Addict
Posts: 439
Joined: Tue Apr 19, 2005 7:05 pm
Location: SE Ohio
Contact:

Re: Air bag plugs

Post by ohioboater »

Most float bag dump valves are made by Halkey Roberts:

http://www.halkeyroberts.com/products/i ... valve.aspx
Einar
CBoats Addict
Posts: 398
Joined: Sun Apr 18, 2010 8:02 pm
Location: British Columbia

Re: Air bag plugs

Post by Einar »

Good info, thanks.

Mark
It's 1" i.d. (or 2.54 cm for "metric air")

Christine picked up the boat yesterday; I enforced a "sell back to me" clause at cost. I figure that the Outrage would be good boat for the M.F. Salmon on a raft supported trip, complementing a solo'ed Caption for a canoe supported trip.
Paddling is easy, organizing shuttles is hard.
Not misplacing all your crap in somebody else's car seems to be even harder
User avatar
Marc Evans
C Guru
Posts: 241
Joined: Wed May 11, 2005 6:01 pm
Location: Pullman, Washington

Re: Air bag plugs

Post by Marc Evans »

Einar, I have the correct size plug. I'll cut the whole thing out with an inch or so of material. Send your address in an email to my work email address and I will put it in the mail.

Marc

P.S. I hope that Christine enjoys the Outrage.
Post Reply