The boat is a Noah Moldau. Back in the day, I guess you would / could order a boat that was only finished to a point. This one has the deck and hull seamed together on the inside only - no outside seams. Cockpit holes are roughed in. No walls, no saddles, nothing inside. I had planned to finish it out, but never did - open boating with the kids has just been . I bought seam tape from Sweets. I bought to cockpit rims from Kaz, not trusting my glass skills to lay them up, but figuring I could epoxy them in. It's never been in the water - not a scratch on it. I think I have pictures somewhere - possibly on an old hard drive - that show the build sticker. I could of course, pull this down from the rafters .
I'll try to get some photos uploaded shortly.
The boat is in Lexington, SC (near Columbia).
Seam tape and cockpit trims included.
Make offer.
C-2
Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin
- sbroam
- CBoats.net Staff
- Posts: 3969
- Joined: Thu Nov 07, 2002 2:12 am
- Location: Lexington, SC
- Contact:
C-2
C-Boats Moderator
http://picasaweb.google.com/scott.broam/CanoeOutfitting
http://picasaweb.google.com/scott.broam/CanoeOutfitting
- sbroam
- CBoats.net Staff
- Posts: 3969
- Joined: Thu Nov 07, 2002 2:12 am
- Location: Lexington, SC
- Contact:
Re: C-2
An admittedly poor picture...
C-Boats Moderator
http://picasaweb.google.com/scott.broam/CanoeOutfitting
http://picasaweb.google.com/scott.broam/CanoeOutfitting