DR Critical Mass question
Moderators: kenneth, sbroam, TheKrikkitWars, Mike W., Sir Adam, KNeal, PAC, adamin
-
- C Boater
- Posts: 31
- Joined: Tue Mar 13, 2007 5:00 pm
- Location: Connecticut
- Contact:
DR Critical Mass question
wondering if anyone has converted one.
I'm importing a container of the DragoRossi boats and would like to be able to accomodate a C1 friend of mine with the stock that I am getting. The Critical Mass looks like a good conversion, but since I"m not a frequent Cboater I figured I'd ask here first.
Scott
100waves.com
I'm importing a container of the DragoRossi boats and would like to be able to accomodate a C1 friend of mine with the stock that I am getting. The Critical Mass looks like a good conversion, but since I"m not a frequent Cboater I figured I'd ask here first.
Scott
100waves.com
- the great gonzo
- Paddling Benefactor
- Posts: 1718
- Joined: Wed Jun 18, 2003 2:03 am
- Location: Montréal, Québec
I have never converted one, but I had a good look at it last year at Moosefest. That boat looks great. If I was to convert a creekboat for myself, it would definitely be near the top of the heap.
It's lines are very similar to the ones on the Big Gun, which a friend of mine has converted into a C1, and that boat is so far one of the best C1 conversions I have paddled, so the CM should be good to go.
If your friend does convert one, please give us here some feedback about it!
martin a.k.a. the great gonzo!
It's lines are very similar to the ones on the Big Gun, which a friend of mine has converted into a C1, and that boat is so far one of the best C1 conversions I have paddled, so the CM should be good to go.
If your friend does convert one, please give us here some feedback about it!
martin a.k.a. the great gonzo!
Everyone must believe in something. I believe I'll go canoeing - Henry David Thoreau
- Craig Smerda
- L'Edge Designer
- Posts: 2815
- Joined: Tue Dec 10, 2002 3:59 am
- Location: WaUSAu Wisconsin USA North America Earth, etc.
- the great gonzo
- Paddling Benefactor
- Posts: 1718
- Joined: Wed Jun 18, 2003 2:03 am
- Location: Montréal, Québec
How much are they without outfitting?
The fact that MEC was charging CAN$1699 before tax for a DR boat did not help their sales. Now they have the one's thy have (Mafia, Fish and Squashtail) marked down to CAN$1000.
martin a.k.a. the great gonzo!
The fact that MEC was charging CAN$1699 before tax for a DR boat did not help their sales. Now they have the one's thy have (Mafia, Fish and Squashtail) marked down to CAN$1000.
martin a.k.a. the great gonzo!
Everyone must believe in something. I believe I'll go canoeing - Henry David Thoreau
Martin, Corran posted something on www.boatwerks.net not too long ago with prices...
http://www.boatwerks.net/boaterboard/vi ... highlight=
I'm presuming the base price for the boat is standard for all DR boats but I could be wrong. Either way, pertty cool idea for cboaters.. we could almost call these 'c1's' instead of conversion!
http://www.boatwerks.net/boaterboard/vi ... highlight=
I'm presuming the base price for the boat is standard for all DR boats but I could be wrong. Either way, pertty cool idea for cboaters.. we could almost call these 'c1's' instead of conversion!
CM similar to BigGun
I have paddled a BigGun Expedition conv. for the past 5 years and it works well for me. Seldom paddle my Atom anymore. The CM looks like a longer BG with some mods. CM would be at top of my list if I was getting new ride. Think I saw new CM bare for $799 or $899 retail. Would go for the hatch again, great feature.
- Craig Smerda
- L'Edge Designer
- Posts: 2815
- Joined: Tue Dec 10, 2002 3:59 am
- Location: WaUSAu Wisconsin USA North America Earth, etc.
"Price Check" in aisle... http://www.100waves.com/martin wrote:How much are they without outfitting?
The fact that MEC was charging CAN$1699 before tax for a DR boat did not help their sales. Now they have the one's thy have (Mafia, Fish and Squashtail) marked down to CAN$1000.
martin a.k.a. the great gonzo!
No need for outfitting we don't require.
-
- C Boater
- Posts: 31
- Joined: Tue Mar 13, 2007 5:00 pm
- Location: Connecticut
- Contact:
the boats start at $799 USD
I don't have the shipping worked out to Canaday yet. Of course I could ship there now, but its just really expensive. I might make sense to run a few boats up to Montreal for Corran to ship...
Anyway. Thanks for the responses. I have an old Mafia that was (unfortunately) used as a roll bar for my friends car. The dog and driver survived (as well as a playboat). I ripped the seat out and took a torch to it and the hull popped out most of the way. If I can get the last little wow out of it, I think that I"ll just convert that and see how it goes. The Critical Mass would make a better conversion for me personally becaue I'm a poor cboater. But, my friend might get along well with the Mafia. I'll let people know how it goes.
The only other one of our boats that I've seen converted is a Fish.
Scott Barnes
DR USA importer
http://www.100waves.com
I don't have the shipping worked out to Canaday yet. Of course I could ship there now, but its just really expensive. I might make sense to run a few boats up to Montreal for Corran to ship...
Anyway. Thanks for the responses. I have an old Mafia that was (unfortunately) used as a roll bar for my friends car. The dog and driver survived (as well as a playboat). I ripped the seat out and took a torch to it and the hull popped out most of the way. If I can get the last little wow out of it, I think that I"ll just convert that and see how it goes. The Critical Mass would make a better conversion for me personally becaue I'm a poor cboater. But, my friend might get along well with the Mafia. I'll let people know how it goes.
The only other one of our boats that I've seen converted is a Fish.
Scott Barnes
DR USA importer
http://www.100waves.com
Last edited by ScottBarnes on Tue Mar 20, 2007 4:29 am, edited 1 time in total.
-
- C Boater
- Posts: 31
- Joined: Tue Mar 13, 2007 5:00 pm
- Location: Connecticut
- Contact:
-
- C Guru
- Posts: 155
- Joined: Sun Oct 15, 2006 3:01 pm
DR CRIT MASS
SCOTT, CORRAN HIGHLY REC'D CM FOR A C-1 CREEK CONVERSION TO ME IN THE RECENT PAST. THE BOAT CERT. SPECS OUT GOOD FOR ME(225#). I'VE NEVER SEEN THE BOAT IN PERSON, JUST CYBER & PAPER, ANY SUGGESTIONS ON HOW TO MAKE THIS HAPPEN? I'M IN NO. CENTRAL CT JUST MIN'S FROM TVILLE. W/B LOOKING FOR HULL/HATCH & CRITICAL "SAFETY GEAR", BUT HAVE NO USE FOR THE OTHER INNARDS UPON PURCHASE. ANY INFO W/B A GREAT HELP...
THANKS...HH
THANKS...HH
-
- C Boater
- Posts: 31
- Joined: Tue Mar 13, 2007 5:00 pm
- Location: Connecticut
- Contact:
Wow. I should have checked this thread sooner.
Hammerhead. Clarke Outdoors in Cornwall, CT has a full demo fleet. I also have a full demo fleet. We should meet up sometime. Tville if the water is low, somewhere else if we get rain again. I'm down at Bulls Bridge all the time.
Scott
dragorossi@gmail.com
Hammerhead. Clarke Outdoors in Cornwall, CT has a full demo fleet. I also have a full demo fleet. We should meet up sometime. Tville if the water is low, somewhere else if we get rain again. I'm down at Bulls Bridge all the time.
Scott
dragorossi@gmail.com
-
- C Boater
- Posts: 31
- Joined: Tue Mar 13, 2007 5:00 pm
- Location: Connecticut
- Contact:
That is seriously cool !!!!!!!!!! (am I a dork for admitting that?)
check this out.
http://totalwhitewaterfun.blogspot.com/ ... gster.html
check this out.
http://totalwhitewaterfun.blogspot.com/ ... gster.html
-
- C Guru
- Posts: 155
- Joined: Sun Oct 15, 2006 3:01 pm
CRIT MASS
SOUNDS VERY GOOD, GOT SOME FOND MEMORIES RELATING TO CLARKE OUTDOORS & SOME NIGHTMARES RELATING TO BULL'S. I WAS RECENTLY T/W DAVE SAAF ABOUT PLANS FOR NEW BOATS, PADDLING DESTINATIONS, ECT & HE SAID HE KNOWS YOU, SO MAYBE WE CAN WORK SOMETHING OUT. HE DID SAY HE PROBABLY WOULD NOT BE ON THE WATER THIS W/E THOUGH(4/28-29). I'LL PROBABLY BE STICKING CLOSE TO THE FARMINGTON, TO PADDLE & TO STOP BY THE SPRING SALE @ COLLINSVILLE C&K.