Decked Canoes, Open Canoes, as long as they're canoes!
Moderators: kenneth , sbroam , TheKrikkitWars , Mike W. , Sir Adam , KNeal , PAC , adamin
Lappie
C Guru
Posts: 226 Joined: Fri May 07, 2010 1:07 am
Location: whitehorse, yukon
Post
by Lappie » Fri Mar 18, 2011 8:54 pm
I thought about that a wile back....but never found anything that would work easily...If some body as an idea, please chare it!
sbroam
CBoats.net Staff
Posts: 3969 Joined: Thu Nov 07, 2002 2:12 am
Location: Lexington, SC
Contact:
Post
by sbroam » Fri Mar 18, 2011 9:02 pm
There is a lot of energy sloshing around in your boat when you are swamped. If there was a way to capture that, as a selfwinding watch captures the energy of your arms swinging around...
Lappie
C Guru
Posts: 226 Joined: Fri May 07, 2010 1:07 am
Location: whitehorse, yukon
Post
by Lappie » Sat Mar 19, 2011 1:06 am
does any body tryed the "nevafull" thing, holes?
Smurfwarrior
C Maven
Posts: 1491 Joined: Mon Dec 14, 2009 3:09 am
Location: Utah
Post
by Smurfwarrior » Sat Mar 19, 2011 1:59 am
It's so dry, open or decked, that I think it would be counter productive to let water in to even the level out with nevaful idea. Just don't need it with this boat.
Todhunter
Ridge Spirit Outfitting
Posts: 768 Joined: Fri Aug 21, 2009 11:42 am
Location: Chattanooga, TN
Post
by Todhunter » Sat Mar 19, 2011 9:17 pm
Now that I can roll mine, I have no intentions of cutting the decks off.
Matt Todhunter
Ridge Spirit Outfitting - Custom Bulkhead Canoe Saddles
Smurfwarrior
C Maven
Posts: 1491 Joined: Mon Dec 14, 2009 3:09 am
Location: Utah
Post
by Smurfwarrior » Sun Mar 20, 2011 12:32 am
And I was happy to be right there to witness your first combat roll, well done!
Todhunter
Ridge Spirit Outfitting
Posts: 768 Joined: Fri Aug 21, 2009 11:42 am
Location: Chattanooga, TN
Post
by Todhunter » Mon Mar 21, 2011 12:30 pm
Thanks, Jeff!
Matt Todhunter
Ridge Spirit Outfitting - Custom Bulkhead Canoe Saddles