C-Forum

Hey Scott, yup raft vinyl, from the trash bin at a rafting company.

Gumpy, won't be heading to Moosefest this year. It's a goodtime, but memory is still fresh from the last...paddling against the wind into a cold driving rain that turned to snow.

Looking forward to the New Boston MA release that ...

I've paddled my plastic gunwhaled Outrage vintage '03 for four Northeast winters, it's not all that fragile but chances for cracks from hits due to the cold temps are higher.

One NewYears paddle had it loaded on the car outdoors, temps were down in the teens overnight and didn't get above freezing ...

From my limited experience of both rivers I'd say the Hudson Gorge NY under 5.5 is very different from the Kennebec Gorge ME at 8000. The Kennebec at 8000 has larger waves and is not what I would call sneakable. A long swim on the Indian, the entrance river to the Hudson, could be as long as one on ...

I've got dual Atwood 1250's running off a SLA 12v. Pump to outlet distance is 2'. Pumps are placed in front of saddle, outlets are on each side of the boat, full boat with bags empties to almost dry in 2 minutes. A fully charged year old battery (charged for about 6 hrs.) has less than hour of ...

Tommy, my dual 1250 pumps, off a 12 v, no fuse have been working a year without fail ever since you set me straight on the circular wiring thing I had going on. Now ya tell me I need a fuse?

Being electrically challenged, please tell what kind of fuse do I need and where and on what wire does it ...

Like a true 'woodchuck' (a type of Adirondacker) Louie had one request, Genny Cream Ale. So we loaded up the truck and went to Tennessee. Tales were told, but Psycho would not tell which one rapid of the Green he hasn't swum. Psycho tales have since seeped into the deep woods of Vermont, there may ...

Hey Louie long time, so what are you going to do with the pics? If you don't want to mess with the electronic is there a mailing address?

You been doing any creekin' or is it just as dry down there as it has been up here? Heidi

Edit - Embedded links in copy below lost in posting, please go to: http://www.npmb.com/cms2/forum_viewtopic.php?4.77909 for working links.

This river is a gem please take a moment to write and repost on other sites. Deadline for comments September 13. ~ Heidi

On Janurary 5-6, 2007, 10 whitewater ...

letters & e-mails are needed!

It has been illegal to paddle the Chattooga Headwaters since 1976, not long after Deliverance was made on that river. A group of paddlers, canoe clubs, and American Whitewater have been battling the U.S. Forest Service since the late 1990s to open those waters to ...

Middle Fork of the Salmon Trip August 8-14, 2007. Synopsis: Wake up among the pines alongside a beautiful wilderness river and go play, goodtimes….

The Wild and Scenic Middle Fork of the Salmon River in Idaho is situated in the Frank Church-River of No Return Wilderness, accessed by private ...

Thanks for all the info guys, much appreciated. To get an invite on a classic beauty, as well as the offer of a boat to borrow, is pretty special and rare best I can tell...but...much to think about.

Taniwha, your pictures are exquisite. When the picture of His Kanubic Travesty appeared it actually ...

Jimminy Crickets, I bet the kids will crack the code before I do...

Anyone done an August or low flow trip on the MFS? It's around 760cfs now and dropping daily, AW puts the low minimum at 1200, is that minimum for rafters? Looking for any information, predictions, opinions, etc...scheduled for an August 8 putin, self-supported OC1 for seven days. I can't seem to ...

Hey Bill, my 2 cents based solely on experience with a royalex hull...Before considering doing any kind of carving-out, I would first try a hair dyer, keep moving it over and around the bracket, might take a few minutes to get an edge to loosen and then patiently keep at it, avoid the sharp tools ...

LEW's post got me thinking about our different experiences with Krylon Fusion plastic paint durability. It could be surface prep, but I'm inclined to discount that in my case as I did follow can instructions and anywhere it was painted and not rescratched is still holding on and it was done in under ...